NVR - How To Setup Tripwire - 202203

Modified on Tue, 23 May 2023 at 04:48 PM



In this guide, we will show you how to setup the tripwire IVS feature on a supported device




  • Supported device with tripwire feature

Step by Step Instructions 


1. From the Main Menu click AI

2. Click Parameters > Smart Plan

3. Use the drop down box to select the Channel

4. Click the IVS icon to enable. (Click Apply)

5. Click Parameters > IVS

6.  Use the drop-down box to select the Channel.  Then click Add in the lower right side of the screen to Add an IVS rule

7. The created rule will appear in the list

8. Click the Pencil icon to draw the Tripwire rule

9. The Channel will fullscreen. Left click anywhere inside the video frame to begin drawing the Trip line, then use the mouse to draw the trip line. Right click to end drawing

10. The Tripwire menu will appear

11. Click the following icon to set the Trigger settings when the IVS Tripwire rule is engaged.

12. The Trigger menu will appear

13. Once all Tripwire settings have been configured, Click Apply in the lower right of the screen to save all changes

14. The created Tripwire is now programmed

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article