NVR - How to control IVS, SMD by "alarm in" through NVR5 series - 202202

Created by Cheng Zhang, Modified on Tue, May 23, 2023 at 4:23 PM by Dahua DACH Regional Technical Support

Description:

In this guide, we will show you how to control IVS, SMD by "alarm in" through NVR5 series

1. Enter the NVR

2. Make sure NVR is the customized version. (Example in following picture)

3. Click "AI" function

4. Set up IVS or SMD configuration in NVR step by step

5. Select the "Alarm-in Port", then choose the channel

6. Enable configuration