1. Port Mapping in the router
Firstly, the user should have a fixed public IP address. Then, mapping the DSS to the internet, here is the ports list, which users should open in the router.
Mapping Ports:
Server Name | Protocol | Port |
WEB | TCP/http | 8000 |
WEB | TCP/https | 8443 |
WEB | CMS | 9000 |
WEB | SHUTDOWN | 8006 |
WEB | REDIRECT | 9005 |
Vehicle-saas | TCP/http | 9002 |
Vehicle-saas | TCP/https | 9003 |
SS | TCP/RTSP TCP/RTSPS | 9320 9322 |
SOSO |
| 12366 |
PENGINX |
| 80 |
PENGINX |
| 443 |
PCPS | Register | 9550 |
PCPS | Sip | 5060 |
OSS | TCP/http | 9900 |
OSS | TCP/https | 9901 |
MySQL |
| 3306 |
MTS | TCP/RTSP TCP/RTSPS | 9100 9102 |
MQ | Openwire | 61616 |
MQ | MQTT | 1883 |
MQ | AMQP | 5672 |
MQ | STOMP | 61613 |
MQ | JETTY | 8161 |
MGW |
| 9090 |
FTP | FTPS CUSTOM PORT | 21 10000-10100 |
DMS |
| 9200 |
BusSaaS | HTTP | 9013 |
BusSaaS | HTTPS | 9012 |
ARS | TCP | 9500 |
ADS | 9600 |
Make sure all the port as above is enabled.
2.DSS server setting
Fill in the public IP address in Mapping IP (in DSS server), the CMS IP is DSS local IP address.
How to check if the port mapping succeed?
One way is that, use the public ip+WEB TCP/HTTP port 8080 to login the DSS client
3. Device side
login the device website, in “Network-P2P”, check the device P2P online firstly. Then go to “Network-Register”, enable the function as below.
4. Add the device in DSS
choose “add Type” Auto Register, then fill in the Registration ID from the last step, then click Add.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article